Oberon M/C Parts

View Cart | Checkout  | Items:, Value:

Bar End Motorcycle LED Indicators - DOUBLE SIDED

Oberon M/C Parts | Indicators & Winkers |  Bar End Motorcycle LED Indicators - DOUBLE SIDED

Bar End Motorycle LED Indicators - PAIR



102.49
(Including VAT at 20%)

Quantity:  

Anodise Colour
Choose collet size (internal diameter of handlebar)


Bar end motorcycle indicators by Oberon Performance. Bi-directional LED CAD/CAM designed to increase safety and to alleviate most of the current LED aftermarket indicators issues. Benefits include:

~ Improved motorcycle safety
~ Highly visible
~ Extra wide angle viewing pattern
~ LED flash visible from front and rear of indicator body (double sided)
~ Instant illumination and no fade
~ Small current draw
~ Billet aluminium housing
~ 12 Volt
~ High power amber LEDs
~ Elegant design
~ Stainless steel fasteners
~ Collets to suit 12mm to 19mm handlebar internal diameters (7/8" bars) or 22mm for 1" handlebars.

The indicator uses eight high powered wide angled LEDs either each side of the circuit board. Each indicator is visible from both the front and the back of the unit with equal luminosity. This has a substantial improvement on the visibility of the indicators and being at the very end of the handlebar, greatly adds to the safety of the motorcycle and rider. Due to their low draw rate and very nature, LEDs offer a much longer life than ordinary filament indicator bulbs.
LEDs do not have a time delay on operation so they are instantly on at full power and off with no fade. Again this gives a distinct and noticeable flash or presence to other road users making it much less likely for the indicator to be ignored or overlooked. One of the most common complaints we have observed at Oberon Performance, is of the many other motorcycle indicators that have low quality lenses. Our unique lens fully envelopes the LED circuit board completely with a 360 degree solid wall providing a melt proof, shake proof and loss proof cover. These indicators are CNC machined from billet aluminium and are available in black or silver anodise. Complete with stainless steel fasteners, sleeved cable (350mm long) and a brass collet to allow fitting to hollow handlebars for most motorcycles. Available in two sized kits 12mm to 19mm (7/8" handlebar) or 22mm (1" handlebar).

PLEASE NOTE: some motorcycles are fitted with Bulb type Indicators, EVEN some modern bikes. Please confirm this as you may need Resistors (available on our menu) to control the flash rate - if you have any doubt then please ask for advice. Because of the high power and heat that is produced by these LEDs they need to remain cool during operation, please do not wire them to be permantly on as running lights, or fitted in conjunction with heated grips for example.

Indicator body size: 50mm long x 35mm diameter

Weight (Each): 100g

Priced per Pair

Click for LARGE image



PDF Diagram for LED Indicators


Bar End Motorycle LED SINGLE -  Indicator



54.99
(Including VAT at 20%)

Quantity:  

Anodise Colour
Choose collet size (internal diameter of handlebar)


Single replacement Bar end indicator by Oberon Performance. Bi-directional LED CAD/CAM designed to increase safety and to alleviate most of the current LED aftermarket indicators issues.

~ Replace one accident damaged unit
~ Collets to suit 12mm to 19mm handlebar internal diameters (7/8" bars) or 22mm for 1" handlebars.

PLEASE NOTE - You are ordering one half of a handlebar set, scroll up the page for a PAIR

Weight (Each): 50g



PDF Diagram for LED Indicators


Oberon M/C Parts | Indicators & Winkers |  Bar End Motorcycle LED Indicators - DOUBLE SIDED

spacer
spacer