View Cart | Checkout | Items:, Value:

12v LED Ultra Bright Driving Light

Oberon M/C Parts | 12v LED Ultra Bright Driving Light

Quantity:

Anodise Colour

Driving Lamps - Creative Precision...
12v LED Ultra Bright Driving Light, designed to make other road users aware of your daytime presence and greatly enhancing night-time riding. Extremely powerful wide angled LEDs with adapted Optics, which generate a concentrated beam - thus ensuring excellent light spread. The LED's were designed to be in a colour spectrum that pierces though dusk and normal daytime light conditions.
The result produces the 'Long Light Effect'. which determines the distance from which you will be noticed, in most cases; as far as the eye can see.
Whilst motorway riding you will notice that traffic instinctively gives way without you having to adjust your normal riding technique. Never again should you hear ''Sorry mate - didn't see you'' because there will be no way other road users have any choice BUT to notice you.
The LED's are arranged as a triangular pattern - which has proven to be a natural 'hazard' warning to alert the human mind without any thought process required. If the lights are mounted to your motorcycle as a pair with your headlight forming 'the triangle of light' then this will ensure you are instantly noticed .
Night-time riding is also transformed. Unlike other motorcycle lights that have a flat top beam, these driving lamps have a round beam. The important difference between a flat top beam and a round beam is the inevitable loss of light during cornering. This is due to the natural effect of the flat top beam when leaning or cornering a motorcycle with a standard headlight, suddenly reducing the spread of light when and where you require it most. With these 12v LED Ultra Bright Driving Lights, their rounded beam light pattern remains constant and therefore far more visible throughout the various degrees of lean; so no more loss of light during cornering and added awareness to other road users.
Order in single units - best fitted as a pair.
Price each £175.00 inc Vat
Each unit has 3 Extremely Bright, pure brilliant white - High Power LEDs.
Constant current LED Drive circuit will draw a maximum of 1000mA when run at between 10-30 Volts.

Weight: 420g per Light
Size: 62mm Diameter x 82.5mm Long
Colours: Black anodised

OUT OF STOCK

Click for LARGE image

Installation Notes

Quantity:

Waterproof Push Button Switch

Waterproof Push Button Switch

This waterproof push button switch which is rated at 10amps is supplied with a rubber boot. The flying leads are 10cm long. The switch should be fitted through a 9.3mm hole with a maximum panel thickness of 3mm. The switch is push on, and push again - for off. Which is referred to as a latching switch.

We suggest fitting the switch with a small drop of silicone sealant around the panel hole which helps secure the switch without having to over tighten it.

This is a good quality positive action switch.
Sold and packaged as single unit.

Price:£9.99
(Including VAT at 20%)

Quantity:

CAN bus Wiring Harness with 10A Relay

CAN bus Wiring Harness

CAN bus Wiring Harness with 10A Relay, supplied with a wiring diagram to assist with easy fitting.
The harness is fitted with a 10Amp relay which is waterproof and potted to ensure easy trouble free service. The harness is 1.5 metres long and is ideally fitted with the potted relay somewhere under the saddle in a small storage area, alternatively in the void behind the tail light. The relay is potted in a cylinder which is 32mm diameter and 47mm long.

Click for LARGE image

Wiring Instructions

Price:£29.98
(Including VAT at 20%)

Quantity:

Anodise Colour

M6 Threaded Post

Designed to fit the 22mm U Bracket on Oberon Lamps, this allows mounting with a M6 fitting that can be bolted through a hole or similar location on your motorcycle. The Swivel bolt is included with the lamp, plus an M6 x 16mm Stainless Steel Allen bolt.
The M6 Threaded Post is ordered as a single unit, order two for a pair.

Price:£21.49
(Including VAT at 20%)

Quantity:

Anodise Colour

P Bracket

Designed to fit the 22mm U Bracket on Oberon Lamps, this allows mounting with a M8 fitting that can be bolted to the head lamp, fork leg or similar location on your motorcycle. The P Bracket has a boss of 22mm diameter x 8mm long, this ensures the bracket sits clear of bodywork or recesses.
The P Bracket is ordered as a single unit, order two for a pair.

Price:£24.99
(Including VAT at 20%)

Quantity:

Anodise Colour

22mm - 32mm Mounting Clamp

This clamp will fit either 7/8" (22mm), 1" (25mm) or 1 ¼" (32MM) mounting diameters. This will include handlebars, crash bars or any other suitable round component. Also we have found some smaller or classic motorcycles with slender forks tubes that can utilise these for fork mounted applications.
The clamp is additionally supplied with reducer sleeves (not pictured) to accommodate the sizes listed above, small variations will also fit, but our advice is to call or email with your specific requirements so we can confirm before you order. The clamp is supplied with stainless steel bolts.
The Mounting Clamp is ordered as a single unit, order two for a pair.

Price:£39.99
(Including VAT at 20%)

Oberon M/C Parts | 12v LED Ultra Bright Driving Light

Product Sections

Store Information

12v LED Ultra Bright Driving Light

Click for LARGE image

£9.99

Click for LARGE image

£29.98

£21.49

£24.99

£39.99